Product Lineup

  1. MTFerrule
  2. MTCOMPACT

MT Ferrule

Product description

MT ferrule can connect the multiple fibers with high-precision and high-density technology to achieve low loss in each fiber.
A wide range of MT ferrule for SM and MM including 4,8,12,16,24,32,48 fiber application.
Low loss type is available in both SM and MM.
※Technical transferring and licensing to manufacture and market by NTT.

Product features

Our MT ferrules has been used Thermoplastic Resin PPS as its material.

1. The multiple fiber with a diameter 125μm and 250μm pitch is assembled with MT ferrule by epoxy and polish to form for ideal end face for connection.

2. Fiber protrusion on flat end face for MM and on angle end face for SM are performed by polishing.

3. By inserting the stainless guide pin into the guide pin hole, both sides of MT ferrules can be connected.  The specification of MT ferrule confirms to IEC61754-5.

MT Ferrule Product Lineup

MTフェルール品種一覧

2. MTCOMPACT

MTCOMPACT Lineup

●Thickness:1.25mm
●Length:4mm
● Thickness:1.25mm & Length:4mm

MTCOMPACTSlim

Thickness:1.25mm

1. This MTCOMPACT® has a thickness of 1.25mm and can be fitted in a very small space, which is required for an optical module.
2. The fiber hole with a diameter is 125μm with 250μm pitch.

Half Thickness 12 MT Ferrule

MTCOMPACTShort

Length:4mm

1. This MTCOMPACT® has a length of 4mm and can be fitted in a very small space, which is required for an optical module.
2. The fiber hole with a diameter is 125μm with 250μm pitch.

MTCOMPACTSlim & Short

Thickness:1.25mm & Length:4mm

1. This MTCOMPACT® has a thickness of 1.25mm, length of 4mm, and can be fitted in a very small space, which is required for an optical module.
2. The fiber hole with a diameter is 125μm with 250μm pitch.